Manufacturer's DatasheetManufacturer's DatasheetManufacturer's DatasheetPoE injectors tested with Centauri
All 802.3at/bt POEs of 20W or higher should be compatible with Centauri 1G and 10G units.
The following POE injectors have specifically been tested and used in live deployments:
| PoE Injector Brand | Model | Datasheet* | Comment |
|---|---|---|---|
Mstronic | MIT-33G-56B1N | Manufacturer's Datasheet | |
Ubiquity | POE-48-24W-G | Manufacturer's Datasheet | |
| Planet | POE-171A-60 | Manufacturer's Datasheet | High-power up to 60w |
| Mstronic | MIT-88G-56D-BT | Manufacturer's Datasheet | High-power up to 75w |
Using the HEATER function with PoE injectors
If the HEATER function is enabled on your Centauri device, you must use a POE supply that provides at least 802.3bt - 30W power.
* Link to manufacturer's website
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article