Installing CENTAURI
Required Tools 13mm Wrench (pole mounting tool) TORX T20 Screwdriver (pre-assembly tool) Before you start Make sure there is clear line of sight b...
Thu, 7 Oct, 2021 at 2:05 PM
The default passcode is cupofjoe (all in small caps).
Thu, 7 Oct, 2021 at 1:54 PM
Yes, you may mount multiple Centauri devices on a single pole. See below image for recommendations from Transcelestial. However, it is important to bew...
Tue, 28 Sep, 2021 at 12:36 PM
Yes. Centauri may be successfully deployed in any situation where there is a line of sight available between endpoints on the link.
Fri, 24 Sep, 2021 at 4:47 PM
Yes, it is important to run the "fine-tuning" process for every Centauri link, during deployment. Fine-tuning modifies the signal strength of pair...
Fri, 24 Sep, 2021 at 4:36 PM
Today, Transcelestial performs the fine-tuning for every deployment on behalf of our customers. We are working on bringing the fine-tuning process into ...
Fri, 24 Sep, 2021 at 4:39 PM
Basic installation of Centauri 1/10G can be performed by a Transcelestial installation partner or your own field service team. Transcelestial intends fo...
Fri, 24 Sep, 2021 at 4:52 PM
Yes. Part of the product is an interlocking connector which is fixed on our DC port on the Centauri which can help in the installation of a IPS or APS system.
Wed, 6 Oct, 2021 at 2:40 PM
Username: admin password: admin
Thu, 7 Oct, 2021 at 1:56 PM
Scintillation takes place when hot air pockets rise and diffract the wireless optical signal/laser beam. This causes frames/packets to be dropped. ...
Wed, 9 Feb, 2022 at 2:51 PM